(1) the transport of dangerous chemicals, metal compartment of the vehicle should not be used to prevent friction and vibration caused by the accident. If you must adopt, reliable protective measures should be implemented.

　　(2) transport vehicles should be a solid block board, secure, reliable, and ensure that in turn will not slide or drop the article. Dangerous chemicals loading height must not exceed the height of the vehicle stopped plate. Compartment floor should be smooth, dense, seamless, without causing leakage of liquefied hazardous chemicals contact the shaft friction fire.

　　(3) transport vehicles carrying dangerous chemicals in the summer when the sun should have measures or other protective measures, or limited nighttime transportation. Transporting flammable when wet rain and other facilities should be equipped with tarps.

　　(4) transport vehicles should be configured according to the nature of the hazardous chemicals loaded appropriate fire-fighting equipment, protective aid supplies for emergencies. Usually at or near the cab suspension 1211, carbon dioxide or dry powder extinguishers. These fire-fighting equipment and protective aid supplies should be regularly checked and found that leakage, breakage, deformation, or weight loss, there is the sound of the barrel shaking, etc., should be repaired or replaced immediately, to ensure that it is in good condition at all times.

　　(5) special transport vehicles to be hoisted black and yellow flag with the word "dangerous" by the public security department of the provisions in the front or the obvious site to clear eye-catching signs to attract attention of other vehicles. Not fitted with unrelated persons aboard transport flammable or toxic chemicals.

　　(6) When using tankers transporting flammable liquids, tank top and breathing valve should arrester; bottom guide in addition to static devices; exhaust pipe should be added to the fire (star) cover, and should be located in the front position (Yi Usually the liquid fuel handling operations and the vehicle rear side portion); sump should be separated by a number of metal plates, the tank has sufficient rigidity, and can reduce the liquid when the vehicle travels without violent shaking, static friction; electric vehicle ignition system should ensure good contact and perfect to prevent accidents caused by electrical sparks.

　　(7) the use of liquefied petroleum gas tanker loading and unloading, storage tanks should be checked in addition to tankers, testing, pressure test compliance with the relevant requirements, should be provided with the safety requirements of the safety valve, pressure gauge, level gauge on the tank, overcurrent valves, emergency shut-off valve, anti-static grounding chain, fire extinguishers and other fire safety, emergency facilities, and regularly check to make in good condition at all times.

　　 News From: transport of dangerous goods, dangerous goods logistics, dangerous cargo, general cargo transport specialist, Guangdong De Ye Dangerous Goods Logistics Co., Ltd. Website: www.deye56.com